Why stainless steel mesh belt is susceptible to environmental impact

be fully considered. Of course, there is also a point when the stainless steel mesh belt is exposed in inert materials will cause bad results, the first stainless steel mesh belt parts will become more and more fine, resulting in accelerated wear, rust on the general stainless steel mesh belt parts will also affect the sensitive rolling of the roller. I hope the above introduction can help you to use stainless steel mesh with.

In order to use our work can be smoothly, before the use of products generally need to pay attention to many problems, the application of the stainless steel mesh belt is also the same. In order to better assist us, the stainless steel mesh belt needs to pay attention to things summarized as follows:

(1) stainless steel mesh belt in the use of the tension should not be too large, should not slip and the transmission gear and material point is not excessive sag under the premise of ensuring the operation under the minimum initial tension.

(2) in the same machine shall not be different types, different specifications of stainless steel mesh belt connection together.

(3) Generally requires the conveyor to start, so as to avoid motor overload and stainless steel mesh belt slip; Before stopping, except under special circumstances, the material on the metal mesh should be completely unloaded.

(4) the boot sequence is the first to open the final conveyor (unloading stainless steel mesh belt), and then in order to open forward, finally open the material conveyor. The stop order is opposite to the start order.