Common reasons for stainless steel mesh belt slip?

1, the initial tension is too small. Stainless steel mesh belt left the roller tension is not enough to cause the stainless steel mesh belt slip. This situation generally occurs at the start, the solution is to adjust the tension device, increase the initial tension.

2, the tail drum bearing damage does not turn or the upper and lower roller bearing damage does not turn too much. The cause of the damage is that the tail too much buoyancy, not timely maintenance and replacement has been damaged or rotation is not flexible parts, increase the resistance caused by skidding.

3, the friction between the driving drum and the stainless steel mesh belt is not enough to cause slipping. The reason is mostly stainless steel mesh belt with water or wet environment. The solution is to add some rosin powder to the roller.

4, stainless steel mesh belt load is too large, more than the motor capacity will slip. The favorable side of skidding at this time is to protect the motor. Otherwise, the motor will be burned for a long time. But for operation is a skid accident. To solve the phenomenon of stainless steel mesh belt slip, first of all to find the cause of slip, can take effective solutions.

5, start too fast can also form a skid. It can start slowly.