How to choose the procurement and identification method of plastic mesh belt

Daily work procurement how to identify the network belt

1. It is necessary to have rich experience to identify whether the pollution degree is mixed with foreign matter or metal powder. You have to be sufficiently trained to be able to recognize it and you have to have a lot of experience. It must be judged by temperature. This method requires rich experience in genus comparison identification. Must enter the temperature identification method, only used in the operation of the state of little change. For this purpose, a continuous record of temperature must be entered. There are irregular changes.
2. Identify the state of lubricant
3. Identify it by whether it is contaminated with foreign matter or metal powder
4. Through the working temperature rise, there will be failures, not only temperature identification needs to have rich experience. It must be sufficiently trained to be able to recognize
5. Identify by voice
6. Through work. The bearing sound can be clearly heard by using a listener or a listening stick attached to the housing. For this purpose, it is necessary to be fully trained to be able to recognize the method, which is only used for recognition in the operating state
7. For sampling and analysis of lubricants, identification method based on whether the degree of turbidity is mixed with foreign matter or metal powder is particularly effective for bearings that cannot be closely observed.