Five skills of turning belt conveyor

nt can be in accordance with the design of the bending line to achieve natural change of operation, and this kind of turning belt conveyor has a simple structure, easy to maintain. The following five skills to understand the correct use of turning belt conveyor.

1. Switch on the main power supply to check whether it works properly. In normal state, the device does not work.

2. Close the circuit of the power switch, belt conveyor running light is not bright, inverter and other equipment of the power indicator light is lit, the inverter display panel display is normal (trouble-free code is shown) after a electrical equipment start normal (motor or other equipment has reached the normal speed, normal) to go to the next start of electrical equipment.

3 in accordance with the process to start the electrical equipment in turn, must comply with the provisions of the design of the goods to be transported, belt conveyor operation. Comply with belt conveyor design capabilities. Attention should be paid to all kinds of personnel shall not touch the belt conveyor movement part.

4. Secondly, non-professionals should not contact electrical components and control buttons at will. The belt conveyor can not be disconnected to the back stage of the converter in operation.

5. Finally, if the maintenance needs are determined, it must be carried out only when the frequency conversion operation is stopped, otherwise the frequency converter may be damaged. When the belt conveyor stops running, press the stop button to cut off the total power supply until the system stops completely.