Belt conveyor belt tearing how to do?

We all know that the conveyor belt is the carrier of the belt conveyor conveying materials, is one of the most important parts of the conveyor, but in use will often appear a problem, that is to tear. Tearing can be said to be a fatal killer of the conveyor belt. Once the conveyor belt is torn, it must be stopped and replaced, wasting a lot of time. Therefore, we should pay attention to the problem of tearing. Here are some of the reasons for tearing, so you can be on your guard.

1, the conveying material contains sharp objects, these sharp objects are likely to scratch the conveyor belt, if the scratch is deep, it will be in the conveying material, especially those heavy materials, it is easy to tear phenomenon.

2, belt deviation, if the conveyor belt deviation, will make the conveyor belt force is not uniform, some places the force is large, some places the force is small. In this case it's very easy to tear where there's a lot of stress.

3. Tape phenomenon is also easy to cause tearing of conveyor belt. When a large number of materials fall in the chute, the conveyor belt will be stuck, making the conveyor belt can not operate normally, but the motor continues to operate, making the conveyor belt is prone to tearing.

4, conveyor belt is generally rubber belt, so it is easy to appear aging phenomenon, if transported those high temperature, corrosive materials, will accelerate aging. Once the belt is old, it is easy to tear.

5. When adding materials, the material is dumped directly from the height. This design structure is very unreasonable, because the material drop is large, which will cause a great impact on the conveyor belt.